Gilsonite Grade PI-300

Principal Applications
Printing Inks ( Gravure, Headset, New sink )
Paints and Stains
Protective Coatings
 

Properties
Viscosity (25°C, 30% solids, Magie 470) Softening Point (ASTM E28-92)	600 - 1800 cPs 180-205°C 385-400°F <3% Typical 5% Max. Guaranteed <1.5% Typical 2% Max. Guaranteed
Ash (ASTM D-271-70 M)
Moisture (AGC Method)
Penetration (25°C, 100 gm, 5 sec.) Flash Point (COC) Sulfur Specific Gravity Acid No. Color In Mass	0
	400°C; 700°F
	3%
	1.04
	<3
	Black

 

Typical Particle Sizing (ASTM (E11-70))
	% Retained (Cumulative)
	Small Lump	Pulverized
+ 4 mesh + 10 mesh + 35 mesh + 65 mesh + 100 mesh + 150 mesh + 200 mesh	0.2 3.0 -- 55.0 -- 77.0 --	-- -- 0.2 2.0 8.0 -- 35.0

We can Provide any particle Size according to customer requirements.

SOLUBILITY

Gilsonite® resin Selects PI-300 Grade is readily soluble without heating in aromatic solvents (Benzene, Toluene, Xylene) and in most chlorinated solvents. It is also soluble without heating in aliphatic and low aromatic solvents (VM&P and other Napthas, Ink Oils and Mineral Spirits), but mixing time is longer. Without heating, the pulverized grade is recommended.
 

Films developed from Selects PI-300 have a very dark color with little bronzing effect. Solutions do not thicken appreciably upon aging. Selects PI-300 Grade is compatible with drying oils, rosins, hydrocarbon resins, elastomers, asphalts, and waxes for specialty applications. It has limited solubility in most alcohols and ketones.
 

PACKAGING
 

Gilsonite Selects PI-300 is available in 50 lb. and 25 kilo net multi-ply paper bags, which may be palletized and stretch wrapped. It is also available in bulk loaded trucks and in a variety of bulk bag sizes.
 

HEALTH & SAFETY
 

Gilsonite is a naturally occurring hydrocarbon. There is no known history of dermatitis, lung disease or other health problems associated with handling of Gilsonite as supplied. Dusts are subject to combustion. Normal precautions used with flammable materials apply.