CHEMICAL MINE WORLD LTD
Address: Room29, Lot C12, 1st floor, podium level,
Financial Park, 87000, Wilayah Persekutuan Labuan, Malaysia
Whats app: 0060172424951
Gilsonite In Ink & Paints
Gilsonite Resin is widely used as the primary carbon black wetting agent for black news inks.
Gilsonite, "Natural asphalt, Natural Bitumen" Resin competes advantageously with petroleum-based hydrocarbon resins, phenolic resins and metal resinates, all of which it can complement or replace to various degrees. Various concentrations of our Gilsonite Resin are used to manufacture law-rub-off news inks with superior gloss and tack properties. Special grades of Gilsonite called Selects are also standard ingredients in black ink formulations and are used as additives in asphaltic paints and varnishes. For Paint , If added to asphaltic paints and varnishes, Gilsonite's unique qualities improve their roughness, gloss and chemical and weather resistance.Printing Inks, Gilsonite, "Natural asphalt, Natural Bitumen" is an important cost-effective ingredients in the manufacture of high quality vehicles for dark printing inks.
Gilsonite Grade PI-300
Principal Applications
Printing Inks ( Gravure, Headset, New sink )
Paints and Stains
Protective Coatings
| Properties | |
| Viscosity (25°C, 30% solids, Magie 470) | 600 - 1800 cPs |
| Softening Point (ASTM E28-92) | 180-205°C 385-400°F |
| Ash (ASTM D-271-70 M) | <3% Typical 5% Max. Guaranteed |
| Moisture (AGC Method) | <1.5% Typical 2% Max. Guaranteed |
| Penetration (25°C, 100 gm, 5 sec.) | 0 |
| Flash Point (COC) | 400°C; 700°F |
| Sulfur | 3% |
| Specific Gravity | 1.04 |
| Acid No. | <3 |
| Color In Mass | Black |
| Typical Particle Sizing (ASTM (E11-70)) | ||
| % Retained(Cumulative) | ||
| Small Lump | Pulverized | |
| + 4 mesh | 0.2 | -- |
| + 10 mesh | 3 | -- |
| + 35 mesh | -- | 0.2 |
| + 65 mesh | 55 | 2 |
| + 100 mesh | -- | 8 |
| + 150 mesh | 77 | -- |
| + 200 mesh | -- | 35 |
We can Provide any particle Size according to customer requirements.
Gilsonite® resin Selects PI-300 Grade is readily soluble without heating in aromatic solvents (Benzene, Toluene, Xylene) and in most chlorinated solvents. It is also soluble without heating in aliphatic and low aromatic solvents (VM&P and other Napthas, Ink Oils and Mineral Spirits), but mixing time is longer. Without heating, the pulverized grade is recommended.
Films developed from Selects PI-300 have a very dark color with little bronzing effect. Solutions do not thicken appreciably upon aging. Selects PI-300 Grade is compatible with drying oils, rosins, hydrocarbon resins, elastomers, asphalts, and waxes for specialty applications. It has limited solubility in most alcohols and ketones.
Gilsonite For Ink & Paints PDF